News Flash

Fire - Spotlights

Posted on: February 15, 2018

Fire Department Press Release

DSC_0052



Press Release
Preventing Clothing Dryer Fires


February 5, 2018

Recent Fire...

On the morning of Wednesday January 31, the Hanover Park Fire Department responded to a reported structure fire involving a residential clothing dryer.  The fire originated on the second floor of the residence and caused extensive damage.  The investigation determined that the fire’s cause was lint buildup in the home’s clothing dryer.

 

Possible causes of dryer fires...

Lack of maintenance is the leading cause of dryer fires.  Clothes dryers must vent hot air to the outside of the house.  If lint builds up in the exhaust vent or inside and around the dryer, it can block the flow of air causing the dryer to perform poorly, raising the operating temperature of the dryer and causing it to overheat.

Placing combustible or improper materials in the dryer, such as clothes that are soiled with volatile chemicals or items like foam-backed rugs and athletic shoes can also cause fires.  Insufficient airflow resulting from improper installation or crushed exhaust vent is also problematic.

Here's what you can do to help prevent dryer fires...

Clean the lint screen/filter before or after drying each load of clothes.  If clothing is still damp at the end of a typical drying cycle or drying requires longer times than normal this may be a sign that the screen or the exhaust duct is blocked.

Clean the dryer vent and exhaust duct periodically.  Check the outside dryer vent while the dryer is operating to make sure exhaust air is escaping.  If it is not, the vent or the exhaust duct may be blocked.  To remove a blockage in the exhaust path, it may be necessary to disconnect the exhaust duct from the dryer.  Remember to reconnect the ducting to the dryer and outside vent before using the dryer again.

Clean behind the dryer, where lint can also build up.  Have a qualified service person clean the interior of the dryer chassis periodically to minimize the amount of lint accumulation.  Keep the area around the dryer clean and free of clutter.

Take special care when drying clothes that have been soiled with volatile chemicals; such as gasoline, cooking oils, cleaning agents, or finishing oils and stains. If possible wash the clothing more than once to minimize the amount of volatile chemicals on the clothes and preferably hang the clothes to dry.  If using a dryer, use the lowest heat setting and a drying cycle that has a cool down period at the end of the cycle.  To prevent clothes from igniting after drying, do not leave the dried clothes in the dryer or piled in a laundry basket.

Replace plastic or foil, accordion-type ducting material with a rigid or corrugated semi-rigid metal duct.  Most manufacturers specify the use of a rigid or corrugated semi-rigid metal duct, which provides maximum airflow.  The flexible plastic or foil type duct can more easily trap lint and is more susceptible to kinks or crushing, which can greatly reduce the airflow.

Turn the dryer off when leaving the home. Do not leave the dryer running if you need to run out.  If the dryer should malfunction while you are gone, the results could be disastrous.

Make sure that the dryer is plugged into an outlet suitable for its electrical needs.  Overloaded electrical outlets can result in blown fuses or tripped circuit breakers. Dryer should be installed by a professional.

Gas-powered dryers should be inspected by a professional occasionally to ensure that the gas line and connection are intact and free of leaks.

It is the goal of Hanover Park Fire Department to protect our residents through sound fire prevention.  If you have questions, please call the department at 630-823-5800.    






Facebook Twitter Google Plus Email

Other News in Fire - Spotlights

Evergreen Structure Fire

After a Fire

Posted on: December 22, 2017
Fire Station

Community Education

Posted on: December 22, 2017
Firemen giving demonstration at Horizon School

Tours & Classroom Presentations

Posted on: December 22, 2017